Home > Dies Mills Press Equipment > Evacuable XRF Pellet Dies

Evacuable XRF Pellet Dies

Evacuable XRF Pellet Dies

REFLEX Analytical offers the largest selection of XRF evacuable pellet dies. Scroll below to order. The XRF evacuable pellet die series are used to produce compact and durable XRF powdered sample briquettes. The dies are precision fabricated from high quality hardened 440C stainless steel. Each die assembly includes a main body with a vacuum attachment, a base, o-rings(2), optically polished stainless steel anvils(2), a stainless steel plunger, a sample extractor cup to facilitate sample pellet removal and operating instructions.

Tungsten carbide anvils are optional for briquetting very hard or abrasive sample materials which may tend to mar the surface of stainless steel pellets. An oil-less vacuum pump is recommended to assist with the production of moisture free briquettes.

Scroll below and order from the list of standard evacuable XRF pellet dies. Sizes include 20mm, 25mm, 32mm, 35mm, 40mm, 45mm, 50mm, 55mm and 60mm. Larger diameter, customized geometries and dimensions are encouraged and available upon request for evacuable and non-evacuable type dies.

The dies are commonly used with our XRF series of laboratory presses. The selection incudes manual and automated XRF pellet presses featuring programmable linear and parabolic bleed functions. The XRF series of auto presses offer a large number of bleed combinations to eliminate or reduce fissure development commonly associated with sample briquetting.

CLICK HERE to preview other solid and semi-solid sampling accessories such as smaller diameter evacuable pellet dies and pellet molds, manual and auto XRF lab presses, polymer film makers, and much more.

20mm Evacuable Pellet Die Part No. 3165

20mm Evacuable Pellet Die

Part Number: 3165

Precision manufactured from hardened 440C stainless steel and includes a main body, a removable base with a vacuum attachment, (2) polished anvils, plunger, (2) vacuum o-rings, extractor ring and operating instructions.

Die Chamber Height Without Sample: 48mm

Each Die Anvil Thickness: 9.50mm

Maximum Height In Die Chamber For Uncompressed Sample Matrix Using Two Anvils: 23mm (accounts for locating die plunger 6mm into die chamber)

Maximum Height In Die Chamber For Uncompressed Sample Matrix Using One Anvil: 32.50mm (accounts for locating die plunger 6mm into die chamber)

Maximum Load: 24 Tons

Tips

- typically the sample pellet is fabricated between two anvils although one anvil can be used to fabricate a thicker sample pellet.

- allow 6mm minimum to locate the die plunger into the die chamber in order to follow the die chamber wall.

- the evacuable design feature with the use of an oil-less vacuum pump permits easy installation of anvils and plunger without the vacuum resistance normally associated with non-evacuable dies due to the precision fabrication and tight tolerances to mitigate flashing of the powdered sample matrix during pellet fabrication.

Operating Instructions CLICK HERE

$1,895.00

25mm Evacuable Pellet Die Part No. 3170

25mm Evacuable Pellet Die

Part Number: 3170

Precision manufactured from hardened 440C stainless steel and includes a main body, a removable base with a vacuum attachment, (2) polished anvils, plunger, (2) vacuum o-rings, extractor ring and operating instructions.

Die Chamber Height Without Sample: 48mm

Each Die Anvil Thickness: 9.50mm

Maximum Height In Die Chamber For Uncompressed Sample Matrix Using Two Anvils: 23mm (accounts for locating die plunger 6mm into die chamber)

Maximum Height In Die Chamber For Uncompressed Sample Matrix Using One Anvil: 32.50mm (accounts for locating die plunger 6mm into die chamber)

Maximum Load: 30 Tons

Tips

- typically the sample pellet is fabricated between two anvils although one anvil can be used to fabricate a thicker sample pellet.

- allow 6mm minimum to locate the die plunger into the die chamber in order to follow the die chamber wall.

- the evacuable design feature with the use of an oil-less vacuum pump permits easy installation of anvils and plunger without the vacuum resistance normally associated with non-evacuable dies due to the precision fabrication and tight tolerances to mitigate flashing of the powdered sample matrix during pellet fabrication.

Operating Instructions CLICK HERE

$1,995.00

32mm Evacuable Pellet Die

32mm Evacuable Pellet Die

Part Number: 3300

Precision manufactured from hardened 440C stainless steel and includes a main body, a removable base with a vacuum attachment, (2) polished anvils, plunger, (2) vacuum o-rings, extractor ring and operating instructions.

Die Chamber Height Without Sample: 48mm

Each Die Anvil Thickness: 9.50mm

Maximum Height In Die Chamber For Uncompressed Sample Matrix Using Two Anvils: 23mm (accounts for locating die plunger 6mm into die chamber)

Maximum Height In Die Chamber For Uncompressed Sample Matrix Using One Anvil: 32.50mm (accounts for locating die plunger 6mm into die chamber)

Maximum Load: 30 Tons

Tips

- typically the sample pellet is fabricated between two anvils although one anvil can be used to fabricate a thicker sample pellet.

- allow 6mm minimum to locate the die plunger into the die chamber in order to follow the die chamber wall.

- the evacuable design feature with the use of an oil-less vacuum pump permits easy installation of anvils and plunger without the vacuum resistance normally associated with non-evacuable dies due to the precision fabrication and tight tolerances to mitigate flashing of the powdered sample matrix during pellet fabrication.

Operating Instructions CLICK HERE

$2,095.00

35mm Evacuable Pellet Die

35mm Evacuable Pellet Die

Part Number: 3350

Precision manufactured from hardened 440C stainless steel and includes a main body, a removable base with a vacuum attachment, (2) polished anvils, plunger, (2) vacuum o-rings, extractor ring and operating instructions.

Die Chamber Height Without Sample: 48mm

Each Die Anvil Thickness: 9.50mm

Maximum Height In Die Chamber For Uncompressed Sample Matrix Using Two Anvils: 23mm (accounts for locating die plunger 6mm into die chamber)

Maximum Height In Die Chamber For Uncompressed Sample Matrix Using One Anvil: 32.50mm (accounts for locating die plunger 6mm into die chamber)

Maximum Load: 30 Tons

Tips

- typically the sample pellet is fabricated between two anvils although one anvil can be used to fabricate a thicker sample pellet.

- allow 6mm minimum to locate the die plunger into the die chamber in order to follow the die chamber wall.

- the evacuable design feature with the use of an oil-less vacuum pump permits easy installation of anvils and plunger without the vacuum resistance normally associated with non-evacuable dies due to the precision fabrication and tight tolerances to mitigate flashing of the powdered sample matrix during pellet fabrication.

Operating Instructions CLICK HERE

$2,895.00

40mm Evacuable Pellet Die

40mm Evacuable Pellet Die

Part Number: 3290

Precision manufactured from hardened 440C stainless steel and includes a main body, a removable base with a vacuum attachment, (2) polished anvils, plunger, (2) vacuum o-rings, extractor ring and operating instructions.

Die Chamber Height Without Sample: 48mm

Each Die Anvil Thickness: 9.50mm

Maximum Height In Die Chamber For Uncompressed Sample Matrix Using Two Anvils: 23mm (accounts for locating die plunger 6mm into die chamber)

Maximum Height In Die Chamber For Uncompressed Sample Matrix Using One Anvil: 32.50mm (accounts for locating die plunger 6mm into die chamber)

Maximum Load: 30 Tons

Tips

- typically the sample pellet is fabricated between two anvils although one anvil can be used to fabricate a thicker sample pellet.

- allow 6mm minimum to locate the die plunger into the die chamber in order to follow the die chamber wall.

- the evacuable design feature with the use of an oil-less vacuum pump permits easy installation of anvils and plunger without the vacuum resistance normally associated with non-evacuable dies due to the precision fabrication and tight tolerances to mitigate flashing of the powdered sample matrix during pellet fabrication.

Operating Instructions CLICK HERE

$3,295.00

XRF Conversion Die Kit Complete

XRF Conversion Die Kit Complete

Includes: 40mm Evacuable Die with 20mm, 25mm and 32mm Conversion Die Kits.

Part Number: 3400

Precision manufactured from hardened 440C stainless steel and includes a main 40mm die body, a removable base with a vacuum attachment, 20mm, 25mm and 32mm conversion die kits, each die size with (2) polished anvils, plunger, vacuum o-rings, extractor ring and operating instructions.

Die Chamber Height Without Sample: 48mm

Each Die Anvil Thickness: 9.50mm

Maximum Height In Die Chamber For Uncompressed Sample Matrix Using Two Anvils: 23mm (accounts for locating die plunger 6mm into die chamber)

Maximum Height In Die Chamber For Uncompressed Sample Matrix Using One Anvil: 32.50mm (accounts for locating die plunger 6mm into die chamber)

Maximum Load: 30 Tons

Tips

- typically the sample pellet is fabricated between two anvils although one anvil can be used to fabricate a thicker sample pellet.

- allow 6mm minimum to locate the die plunger into the die chamber in order to follow the die chamber wall.

- the evacuable design feature with the use of an oil-less vacuum pump permits easy installation of anvils and plunger without the vacuum resistance normally associated with non-evacuable dies due to the precision fabrication and tight tolerances to mitigate flashing of the powdered sample matrix during pellet fabrication.

CLICK HERE for more information.

$7,395.00

45mm Evacuable Pellet Die

45mm Evacuable Pellet Die

Part Number: 4047

Precision manufactured from hardened 440C stainless steel and includes a main body, a removable base with a vacuum attachment, (2) polished anvils, plunger, (2) vacuum o-rings, extractor ring and operating instructions.

Die Chamber Height Without Sample: 48mm

Each Die Anvil Thickness: 9.50mm

Maximum Height In Die Chamber For Uncompressed Sample Matrix Using Two Anvils: 23mm (accounts for locating die plunger 6mm into die chamber)

Maximum Height In Die Chamber For Uncompressed Sample Matrix Using One Anvil: 32.50mm (accounts for locating die plunger 6mm into die chamber)

Maximum Load: 30 Tons

Tips

- typically the sample pellet is fabricated between two anvils although one anvil can be used to fabricate a thicker sample pellet.

- allow 6mm minimum to locate the die plunger into the die chamber in order to follow the die chamber wall.

- the evacuable design feature with the use of an oil-less vacuum pump permits easy installation of anvils and plunger without the vacuum resistance normally associated with non-evacuable dies due to the precision fabrication and tight tolerances to mitigate flashing of the powdered sample matrix during pellet fabrication.

Operating Instructions CLICK HERE

$3,895.00

50mm Evacuable Pellet Die

50mm Evacuable Pellet Die

Part Number: 4345

Precision manufactured from hardened 440C stainless steel and includes a main body, a removable base with a vacuum attachment, (2) polished anvils, plunger, (2) vacuum o-rings, extractor ring and operating instructions.

Die Chamber Height Without Sample: 48mm

Each Die Anvil Thickness: 9.50mm

Maximum Height In Die Chamber For Uncompressed Sample Matrix Using Two Anvils: 23mm (accounts for locating die plunger 6mm into die chamber)

Maximum Height In Die Chamber For Uncompressed Sample Matrix Using One Anvil: 32.50mm (accounts for locating die plunger 6mm into die chamber)

Maximum Load: 30 Tons

Tips

- typically the sample pellet is fabricated between two anvils although one anvil can be used to fabricate a thicker sample pellet.

- allow 6mm minimum to locate the die plunger into the die chamber in order to follow the die chamber wall.

- the evacuable design feature with the use of an oil-less vacuum pump permits easy installation of anvils and plunger without the vacuum resistance normally associated with non-evacuable dies due to the precision fabrication and tight tolerances to mitigate flashing of the powdered sample matrix during pellet fabrication.

Operating Instructions CLICK HERE

$6,395.00

55mm Evacuable XRF Pellet Die

55mm Evacuable XRF Pellet Die

Request For Quotation

Precision manufactured from hardened 440C stainless steel and includes a main body, a removable base with a vacuum attachment, (2) polished anvils, plunger, (2) vacuum o-rings, extractor ring and operating instructions.

60mm Evacuable XRF Pellet Die

60mm Evacuable XRF Pellet Die

Request For Quotation

Precision manufactured from hardened 440C stainless steel and includes a main body, a removable base with a vacuum attachment, (2) polished anvils, plunger, (2) vacuum o-rings, extractor ring and operating instructions.

Custom Size Evacuable XRF Pellet Die

Custom Size Evacuable XRF Pellet Die

Request For Quotation

Precision manufactured from hardened 440C stainless steel and includes a main body, a removable base with a vacuum attachment, (2) polished anvils, plunger, (2) vacuum o-rings, extractor ring and operating instructions.