Home > Dies Mills Press Equipment > 316°C Heated Circular Pellet Dies

316°C Heated Circular Pellet Dies

316°C Heated Circular Pellet Dies

REFLEX Analytical's heated pellet die assemblies are now available. The standard die sizes include 1.125" and 2.25" diameters. Click on the above image to enlarge to appreciate each die’s engineering design features.

Each die is precision fabricated from high quality hardened stainless steel. The assembly includes a main body, an optically polished stainless steel anvil, a stainless steel plunger and a stainless steel sample extractor sleeve to facilitate sample removal. The dies are commonly used with our series of laboratory presses.

The dies can be heated up to 316°C maximum temperature. Manual temperature control is integrated on the main body for convenient regulation. At 204°C the maximum applied load rating on the 1.125" die is 35,000 lbs and the 2.25" die is rated at 99,000 lbs.

The overall dimensions for the 1.125" die are 3" H x 2.75" W x 3.75" D and 3.5" H x 4.25" W x 5" D for the 2.25" die. Each assembly includes a 3' long electrical cord. Specify 110V or 220V when ordering.

For more demanding extreme temperatures up to 760°C then refer to High Temperature Tungsten Carbide Dies

CLICK HERE to preview other solid and semi-solid sampling accessories such as evacuable pellet dies and pellet molds, XRF dies, manual and auto lab presses, polymer film makers, and much more.

1.125" Diameter Heated Pellet Die

1.125" Diameter Heated Pellet Die (as pictured on the left-hand side)

Precision fabricated from high quality hardened stainless steel. The assembly includes a main body, an optically polished stainless steel anvil, a stainless steel plunger and a stainless steel sample extractor sleeve to facilitate sample removal.

The die can be heated up to 316°C maximum temperature. Manual temperature control is integrated on the main body for convenient regulation. At 204°C the maximum applied load rating on the 1.125" die is 35,000 lbs.

The overall dimensions for the 1.125" die are 3" H x 2.75" W x 3.75" D. The assembly includes a 3' long electrical cord. Specify 110V or 220V when ordering.

Tips

- allow 6mm minimum to locate the die plunger into the die chamber in order to follow the die chamber wall.

- review of the chamber height to confirm there is adequate height to fabricate a pellet to the desired pellet thickness.

- ensure there sufficient area and height for the die assembly with sample between the top and bottom press rams.

$4,495.00

2.25" Diameter Heated Pellet Die

2.25" Diameter Heated Pellet Die (as pictured on the right-hand side)

Precision fabricated from high quality hardened stainless steel. The assembly includes a main body, an optically polished stainless steel anvil, a stainless steel plunger and a stainless steel sample extractor sleeve to facilitate sample removal.

The die can be heated up to 316°C maximum temperature. Manual temperature control is integrated on the main body for convenient regulation. At 204°C the maximum applied load rating on the 2.25" die is rated at 99,000 lbs.

The overall dimensions for the 2.25" die are 3.5" H x 4.25" W x 5" D. The assembly includes a 3' long electrical cord. Specify 110V or 220V when ordering.

Tips

- allow 6mm minimum to locate the die plunger into the die chamber in order to follow the die chamber wall.

- review of the chamber height to confirm there is adequate height to fabricate a pellet to the desired pellet thickness.

- ensure there sufficient area and height for the die assembly with sample between the top and bottom press rams.

$6,495.00