 3mm Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $995.00 |  1/8” Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $995.00 |
 4mm Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $995.00 |  5mm Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $995.00 |
 6mm Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $995.00 |  1/4" Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $995.00 |
 8mm Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $995.00 |  10mm Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $995.00 |
 11mm Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $995.00 |  12mm Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $995.00 |
 1/2" Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $995.00 |  13mm Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $695.00 |
 15mm Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $1,095.00 |  5/8" Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $1,095.00 |
 16mm Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $1,095.00 |  18mm Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $1,195.00 |
 3/4" Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $1,195.00 |  20mm Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $1,195.00 |
 22mm Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $1,295.00 |  7/8" Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $1,295.00 |
 25mm Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $1,295.00 |  1" Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $1,295.00 |
 1 1/8" Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $1,395.00 |  30mm Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 50mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $1,595.00 |
 32mm Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 50mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $1,595.00 |  40mm Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 60mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $1,795.00 |
 50mm Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 80mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $1,995.00 |  76mm Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 116mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $2,295.00 |
 100mm Non-Evacuable Tool Steel Pellet Die Precision manufactured from tool steel and includes a main body, a removable base, (2) polished anvils, plunger and extractor ring. The overall assembled height including the die chamber, baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 150mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). $3,795.00 |
