200°C Hardened 440C Stainless Steel Non-Evacuable Pellet D
REFLEX Analytical offers custom non-evacuable pellet die assemblies with a 200°C heating jacket and digital temperature controller. Click on the above representative image to enlarge and become familiar with each component. Scroll below for pricing and order details for circular sizes ranging from 3mm up to 1 1/8 inches. Larger diameter, customized geometries and dimensions are encouraged and available upon request
Each pellet die is precision fabricated from high quality hardened 440C stainless steel. The assembly includes a die chamber, one set of anvils(2), a plunger, stepped baseplate and an extraction ring to facilitate sample pellet removal. The overall assembled height including the die chamber, stepped baseplate, two anvils and plunger but without sample powder is 104mm. The die chamber only dimensions are 50mm height x 45mm outside diameter with each anvil measuring 10mm thickness (two anvils are typically used for pellet fabrication although one anvil could be used for thicker pellet fabrication). An optional centered thermocouple port is available upon request for a customer supplied thermocouple and independent temperature read out.
REFLEX Analytical recommends the review of the chamber height to confirm there is adequate height to fabricate a pellet to the desired pellet thickness. Also ensure there sufficient height between the top and bottom press rams. The pellet dies are commonly used with our series of
laboratory presses.
Tungsten carbide anvils are optional and ideal for hard or abrasive powdered sample materials which may tend to mar the surface of stainless steel anvils. Notably, the tungsten carbide transverse rupture strength is 500,000 psi and hardened Stainless Steel is 100,000 psi. Therefore theoretically, tungsten carbide offers 5x the compression strength when compared to hardened stainless steel. A tungsten carbide die chamber and die plunger are also higher cost options.
CLICK HERE to preview other solid and semi-solid sampling accessories such as evacuable pellet dies, XRF dies, heated dies, manual and auto lab presses, polymer film makers, and much more.
